LED ceiling hanging dual-purpose line chandelier high-quality aluminum home commercial lighting solution customization

Product Overview

A linear bar with a diffused light face, listed as a line chandelier and used as one: it is the fixture you hang over a long surface when a single pendant leaves both ends of that surface in shadow, and the one you fit flat to the ceiling when there is no height to spare. The same bar does both, which is what makes it useful in projects where the ceilings are not all the same.

That flexibility is the practical point. One profile can cover a kitchen island, an office desk row and a shop counter, so a project does not need three different pendant types for three different rooms. Apart from the mounting kit, everything about the fixture stays the same — order it as a flush ceiling bar now and the same LED pendant light can be re-specified with cables later without changing the housing, the finish or the light.

It is built for interiors that are used hard, in homes and in commercial spaces alike, and the same specification carries from one to the other. That is what makes it straightforward to repeat across a multi-room or multi-site project instead of re-selecting a fixture for every space.

Key Features

• Reads as architecture when flush-mounted — fixed close to the plaster, the bar sits as an LED ceiling pendant light rather than a hanging pendant, which suits corridors, low office floors and back-of-house runs where a drop would be in the way.
• Opens up a room when suspended — on the supplied cable set the bar drops into the space and puts light directly on the surface below, which is what a kitchen island, a long dining table, a reception counter or a display run needs.
• Even output along the run — the light is diffused through a polycarbonate panel instead of being pooled at a few points, which is what makes linear pendant lighting work over a counter or a desk row without bright patches and dark gaps.
• CRI ≥90 keeps colours honest — fabric, food and printed material read true under this fixture, and the neutral white output stays comfortable to work under for a full day.
• No visible strobe — the output is steady to the eye and on camera, which matters in interiors where people sit for hours or where merchandise is filmed for a web listing.
• Metal, not plastic — the profile is aluminium, so it holds a straight line across the full span and gives the LEDs a metal path for heat instead of trapping it in a plastic housing.
• Three output steps — 20W, 40W and 60W let you match the fixture to the surface length and the ceiling height rather than over-lighting a small room or under-lighting a long counter.

Specifications

Mounting & Installation

1. Choose the mounting method before you drill. Flush mounting suits low ceilings and rooms where the fixture should disappear into the architecture; suspension suits higher rooms and surfaces that need light directly above them, such as a kitchen island or a long desk row. Both use the same bar — an LED ceiling pendant light in one case, a suspended linear pendant in the other — so the decision is about the room rather than about the product.
2. Fix the ceiling plate first. Mark the position against the finished surface and secure the mount base into a solid substrate or a ceiling batten. On a suspended grid ceiling, add a backing board or a cross batten so the weight is not carried by the tile alone.
3. Hang or seat the bar. Clip the profile into the ceiling mount, or attach the cables to the canopy and lift the bar into position. Use a second pair of hands on anything over about a metre so the diffuser panel is not scratched on the way up.
4. Level the drop before tightening. As supplied, the suspension gives a set drop; adjust each cable so the bar hangs level and parallel to the ceiling, then lock the fittings.
5. Make the electrical connection. Isolate the circuit before you start, then wire the fixture through the driver supplied with the order, following the wiring rules that apply on site.
6. Check light and finish at handover. Run the fixture and look along the full length for even output, check that the diffuser panel still sits flush in the profile, and make sure no cable is twisted.

Applications

Commercial and hospitality interiors are where this profile earns its place. A shop counter or a display table needs light on the merchandise without a visible source in the customer's eyeline, and a bar hung just above counter height delivers that without the hard glare of a spotlight. Restaurant passes, hotel reception desks and bar tops ask for the same thing: useful light on a working surface, carried by a fixture slim enough that staff and guests simply look past it.

In offices the same bar runs along desk rows and over meeting tables where the ceiling is too high for a surface-mounted fitting and too low for a deep pendant. Specifying one profile for a whole floor keeps the ceiling line clean and leaves the maintenance team with a single fixture type to know. It is also the point at which commercial LED pendant light fixtures usually get written into a plan — as a line of light across a layout rather than as a decorative piece hung over one table.

Residential projects use the bar at a smaller scale: over a kitchen island, above a long dining table, or across a stairwell opening. Two of them over an island put light on the worktop and on the floor between, and the sand white finish recedes against a pale ceiling while the sand black version reads as a deliberate line in a darker scheme.

Customisation & OEM

• Housing colour — sand white and sand black are the standard finishes. If your scheme calls for something else, send the colour reference and we will confirm what can be matched.
• Wattage and light colour — 20W, 40W and 60W with a neutral white output are the standard build; tell us what your specification calls for and we will confirm which version applies to your order.
• Bar length — longer runs over a large island or an open office floor are worth discussing at the drawing stage, so send the layout and we will confirm what is possible.
• Mounting kit — say at the time of ordering whether the bars should be supplied for ceiling mounting, for suspension on cables, or both, so the right fixings arrive with the order.
• Private label — as LED pendant light manufacturers we work directly with your artwork, so this bar can carry your own logo and labelling without passing through a trading layer.
• Consistency across a project — the profile, the finish and the output are held from one order to the next, which is what lets linear pendant lighting look identical in every location of a chain.

Ordering & Delivery

1. Send the brief. Give us the item number, the number of units, the mounting method and the delivery window. Orders come directly from LED pendant light manufacturers, so for a multi-site rollout send the full list at once and it is quoted in one pass.
2. Confirm the configuration. Wattage, housing colour, bar length and mounting kit are agreed in writing before production. If the order covers commercial LED pendant light fixtures for several rooms or floors, confirm whether every unit is to take the same configuration.
3. Confirm the commercial terms. Minimum order quantity, unit price, lead time and payment terms are quoted per model and per configuration, so ask your sales contact for the terms that apply to the quantity you are planning.
4. Confirm packing and carton data. Carton dimensions, units per carton and gross weight are confirmed against your order so container loading can be calculated before the booking is fixed.
5. Confirm the technical detail your specification names. If your document calls for a particular aluminium grade, diffuser material or surface treatment, tell us before production so we can confirm exactly what is applied to your order.
6. Samples and approval. Where the order depends on an exact colour or finish match, ask your sales contact what can be provided for approval before the run starts.
7. Production and inspection. Production is scheduled once the specification and any artwork are approved, and units are checked before packing.
8. Shipping and after-sales. Tell us the destination and the required delivery window; shipping terms are confirmed per order, and your sales contact can confirm the warranty period and coverage that apply, along with how a replacement unit or driver would be supplied if something fails on site.

Material & Build

The bar is built on an aluminium profile. Aluminium is used for two practical reasons: it holds a straight line across the whole span, so the bar does not dip between its fixing points, and it carries heat away from the LED board instead of trapping it the way a plastic housing does. The profile is closed at both ends and the run sits tight against the ceiling plate or the suspension canopy, so no fixing detail is left on show.

Light face. The downward face is closed by a polycarbonate (PC) diffuser panel that seats into the profile. It spreads the output of the 2835 3V 0.5W LEDs along the run instead of letting it pool under individual points, which is what produces an even line of light over a counter, a desk row or a display table. The panel is part of the build rather than a cover — it shapes the light and shields the LEDs, so it stays seated in normal use.

Finish. Sand white and sand black are fine-textured matte finishes applied over aluminium, not a glossy coat. Matte is the sensible choice for this fixture: it does not mirror the room back at you, it does not show fingerprints the way a polished surface does, and it keeps the bar reading as part of the ceiling rather than as a bright object hanging from it. The aluminium body is also what gives the fixture its weight and feel the first time it comes out of the carton on site.

Confirmed against your order. The aluminium grade, the polycarbonate grade of the diffuser, the gasket or sealing arrangement and the surface treatment process are agreed against your specification before production starts. If the document you are working to names a particular alloy, a diffuser type or a treatment such as sprayed, anodised or brushed, send it with your enquiry and we will confirm exactly what is applied to your order. Where the installation is in a damp or dusty interior, say so at the same stage so the sealing arrangement can be confirmed for that condition.

Maintenance & Care

• Switch off and let it cool first. Neither the aluminium nor the diffuser panel should be wiped while the fixture is still warm, and the circuit should be isolated before anyone reaches up to it.
• Dust the diffuser with a dry cloth. A soft microfibre cloth takes normal dust off the PC panel and the profile. Dust is more visible on the light face than on the matte body, so the panel is the part worth doing most often.
• Use water only for anything more than dust. A cloth wrung out in plain water, followed by a dry wipe, handles everyday marks. Solvents, alcohol, ammonia-based glass cleaners and abrasive pads will dull or blotch the matte finish and can cloud the polycarbonate panel.
• Never spray cleaner onto the fixture. Put the cleaner on the cloth, not on the bar, so nothing runs into the profile or down to the driver. This fixture is built for indoor interiors and is not intended for pressure washing or hosing down.
• Leave the diffuser panel seated. Do not lift the panel out to clean behind it; it is held in the profile to keep the light even and to protect the LED board, and refitting it badly is the usual cause of a bright patch appearing later.
• Check the fixings on the routine round. Look at the ceiling plate screws and, on any suspended LED ceiling pendant light, at the cables, the cable clamps and the point where the supply meets the driver. Cables should be under even tension with the bar hanging level.
• Store spares and spare units in the carton. Keep the bar supported and flat, out of damp rooms and direct sun, with nothing stacked on the profile. Both the matte finish and the diffuser panel mark if something heavy rests on them.
• Common mistakes worth avoiding. Wiping while the fixture is still warming up, using a solvent-based cleaner on the matte body, and hanging a bar by its cables while the profile rests on a worktop — that last one is how most diffuser scratches happen on site.

Testing & Compliance

Quality and compliance are handled in-house at Huiheng Lighting. Our factory has held ISO 9001 and ISO 14001 management system certification, alongside BSCI, and our products carry CE, RoHS, ErP, CB, Reach, SAA and TUV approvals for the markets we serve. A CNAS-standard laboratory supports IES file testing and integrating sphere testing, so photometric and performance data can be checked before shipment. Declarations, test reports and compliance documents can be issued per project, with the applicable market scope confirmed together with your team before ordering. Tell us your destination market and required documents, and we will confirm what applies.

FAQ